Re: One Stop Tesla Coil Shop

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Mitchell" <electrontube-at-sbcglobal-dot-net> 

No they don't France or Franceformer makes the best ones, and they have a
cool name!

Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, December 22, 2003 2:07 PM
Subject: Re: One Stop Tesla Coil Shop


 > Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>
 >
 > Hi Mark,
 >
 >
 > >We will start shipping bleeders with the new year - about as long as it
 > >takes this close to Christmas to order and get a thousand or two
 > >shipped.  Expect many extras with smaller orders ;)
 >
 > Excellent!!  Save me the work of sending them to everyone ;-))  I never
 > bother to count them.  I just send a "bunch" ;-))
 >
 >
 > >We are eager for advise, offers, contacts, etc on how to get good,
quality
 > >NSTs, variacs, wire and winding accessories.
 >
 > One could order NSTs wholesale just like a neon shops.  They are
 > surprisingly cheap in quantity.  Wire is the same way.  Variacs are
 > probably a little too odd to get a good quantity discount on.
 >
 > IMHO, ACTown makes the best NSTs:
 >
 > http://www.actown-dot-com/outdoor.htm
 >
 > You may want to check out:
 >
 > http://www.nglantz-dot-com/
 >
 > Places like these order NSTs by the truck load...  I bet they would be
 > happy to wholesale quantity NSTs.
 >
 > They still seem to sell the UL-506 (non-sgfp) types.  They also to custom
 > stuff.
 >
 > http://www.actown-dot-com/products.htm
 >
 > Oddly, they even make chip inductors...
 >
 > http://www.actown-dot-com/chip.htm
 >
 > I think places like Parawire are more than happy to sell you #24 by the
 > case at a big discount.  Probably want to arrange cheap slow truck
shipping.
 >
 > Cheers,
 >
 >          Terry
 >
 >
 >
 >
 > >Happy Holidays,
 > >
 > >Mark Broker
 > >Chief Engineer, The Geek Group
 > >
 > >
 > >On Fri, 19 Dec 2003 07:44:31 -0700, Tesla list <tesla-at-pupman-dot-com> wrote:
 > >
 > >>Original poster: "Richard Modistach" <hambone-at-dodo-dot-com.au>
 > >>being about a new as one can get to the tesla list and coiling,
 > >>from what i've read and seen on various sites bleeders are
 > >>pretty much standard kit with mmc's and with the cost being so
 > >>insignificant(relativly speaking) it sound like a good idea.
 > >>just saves having to sourse something from somewhere else.
 > >>not that it matters much to me here in aus.
 > >>do you guys do copper pipe, magnet wire, pvc, ect,ect.
 > >>just a thought.
 > >>
 > >>regards
 > >>richard
 > >>aus.
 > >
 >
 >