[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: mmc array

To: tesla-at-pupman-dot-com
Subject: Re: mmc array
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sun, 21 Dec 2003 12:41:51 -0700
In-Reply-To: <005601c3c79b$514af0f0$7de3dccb-at-hambone>
References: <005601c3c79b$514af0f0$7de3dccb-at-hambone>
Resent-Date: Sun, 21 Dec 2003 12:46:54 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <OBu2vD.A.jyD.kif5_-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

Hi,

You can use the chart at:

http://hot-streamer-dot-com/temp/MMCcapSales.gif

You probably want the static gap LTR value which would be 0.0080uF (60Hz) 
or 0.0095uF (50Hz).

Cheers,

         Terry


At 01:20 AM 12/21/2003, you wrote:
>hi everyone,
>
>in the mmc array calculator in teslamap 4.1,
>how do i know the correct array voltage to choose?
>i will be running a 15\30 NST with a multitube
>air blast rq gap.
>
>regards
>richard

Prev by Date: Re: Small coil questions?
Next by Date: Re: Doorknob capacitors for primary?
Prev by thread: mmc array
Next by thread: primary coil
Index(es):
- Date
- Thread