Re: Bleed resistors

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

Hi,

I have a few thousand extras ;-))

Just get me your mailing address and I'll send you a bunch.

Cheers,

         Terry

teslalist-at-twfpowerelectronics-dot-com


At 01:45 PM 12/17/2003, you wrote:
>Hello all, i'm lookin for 10 bleed resistors... all the MMCs i seen use 
>the 10Mohm 1/2watt resistors, so i dont really have any concerns about 
>that, but my question is the type, i seen carbon composition, metal film 
>glaze or something or other, and carbon film... the carbon film seem to be 
>the cheapest, and i was wondering whats the best or worst to get. I'm 
>planning on bugging the guys at radio shack to see if they could order 
>some for me, if that didnt work i was gonna use digi key to order them. If 
>any one of you guys have some spares sittin around and would like to sell 
>them to me, that'd be great too, please contact me off the list if you'd 
>like. I hope everyone understood my rambling, the only thing i was asking 
>was where could i get 10 10meg ohm .5 watt bleed resistors for a 16-20kv 
>MMC. Thanks everyone for the help, sorry if i'm a bother.