[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: my power supply was: pt-coil caps/too many?

To: tesla-at-pupman-dot-com
Subject: Re: my power supply was: pt-coil caps/too many?
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 09 Dec 2003 23:15:22 -0700
Resent-Date: Tue, 9 Dec 2003 23:18:55 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <R_x2i.A.lxF.Mrr1_-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: Bart Anderson <classi6-at-classictesla-dot-com> 

LTR for non-synchronous RSG?
Bart

Tesla list wrote:

>Original poster: "RIAA/MPAA's Worst Nightmare" <mike.marcum-at-zoomtown-dot-com>
>  I think that is around 2x resonant for rsg's. Assuming exactly 1.5 kva
>(pt's can easily put out 2-3x this), that would be .0383 uF. More
>capacitance may or may not be better. Most I think get the best cap size by
>experiment (I think the 2x resonant figure is just a ballpark figure). Not
>sure if there's an exact formula to calculate the best size for every coil.

Prev by Date: Re: Water absorbtion of Gray PVC
Next by Date: Re: Ratio of primary outer dia.
Prev by thread: Re: my power supply was: pt-coil caps/too many?
Next by thread: Re: my power supply was: pt-coil caps/too many?
Index(es):
- Date
- Thread