RE: Water absorbtion of Gray PVC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: John <fireba8104-at-yahoo-dot-com> 

Since I want this coil to last I think I'll sand, heat, and cure (can't hurt)
After all I did build the mmc to last - only ~640 vrms across each 
cap(rated 600VAC).
Thanks to all who have replied to this post,
John
Tesla list <tesla-at-pupman-dot-com> wrote:
Original poster: "Jeff W. Parisse"


Original poster: John "has anybody ever ran test to
prove or disprove the reasoning behind sanding and coating the secondary
form?"

I have... (see pervious post)
It's been proven to me. Take my word for it or not, I don't care.
Dan Mccauley was in Jr. High School when I gained my >10kW experience doing
TC shows all over the world. So far the pros say sand, heat, coat and the
hobbyists say not to...

Final thoughts: Do what you want; it's just a hobby.

Jeff