Re: synch with a pole pig coil (again)

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>" <FutureT-at-aol-dot-com>

In a message dated 7/31/03 12:40:50 AM Eastern Daylight Time, 
tesla-at-pupman-dot-com writes:

David,

Yes, it would be interesting to try that.  The pulse caps
can take a lot of abuse if they're reasonable quality.  I've run
my 45 kV rated caps with pretty high voltages up to 40kV peak or
so, but at lower powers of 1000 watts or so.  Checking for
heating is a good guide to what's happening.  TC use is
intermittent, so that's a plus on your side.

John

>So I may try the 0.165 uFD
>42 kV approach to get more energy per bang into the
>primary coil :^) Any additional input from the resident
>list geniuses would be much appreciated :^))
>
>Sparkin' in Memphis,
>David Rieben
>