Re: MOT stack question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Christoph Bohr" <cb-at-luebke-lands.de> 

Hello Chris!

I did this with 6 different MOT's too, but they were at least
very similar. Usually this will work if the MOTs are not too
different ( mini MO vS commercial MO ).

My MOTs all range from 580 to 650mA secondary current, they are
all under oil and run with no failures for several month with
weekly service whth no problems.

However, I feel a longer outdoor (!) test with the finished setup
should show how goot it works in an safe way.

Good luck and a lot of fun with your future power supply.

sincerely

Christoph Bohr

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, August 29, 2003 4:13 PM
Subject: MOT stack question


 > Original poster: "Chris the great"
<downnessisgoingup-at-hotmail-dot-com>
 >
 > I'll be making a 6 MOT stack soon, and am wondering if it is ok
to mix
 > together MOTs with different current values, and if both sides
of the stack
 > have to be the same voltage.  I assume nothing bad would happen
with an
 > arrangement like this, but I'd like to know for sure.
 >
 >
 > Thanks!
 >
 >   -Chris the Great
 >
 > _
 >
 >
 >
 >