[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: door knob caps



Original poster: "Dr. Resonance by way of Terry Fritz <teslalist-at-qwest-dot-net>" <resonance-at-jvlnet-dot-com>


I would just buy the caps from the Geek Group.  It helps out everyone on the
list because the Geek group gets the best possible pricing from high volume
and also the mfgr likes to see orders --- everyone benefits.  The mfgr and
all Tesla list members who use these caps.  They are very durable and work
well for Marx circuits.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, August 18, 2003 8:55 AM
Subject: Re: door knob caps


 > Original poster: "John by way of Terry Fritz <teslalist-at-qwest-dot-net>"
<fireba8104-at-yahoo-dot-com>
 >
 > Thanks Dr. Resonance,
 > I was considering using MMC(tons of radio shack 2kv caps) for caps to if I
 > couldn't find doorknobs. Unfortunately I live in New Jersey(no jokes
 > please) and Chessehold is to far away. Also I hope you win that 250 kv
 > x-ray transformer. I say at least a 4 stage Marx.
 > Thanks,
 > John
 >
 >
 > Tesla list <tesla-at-pupman-dot-com> wrote:
 > Original poster: "Dr. Resonance by way of Terry Fritz "
 >
 >
 > I have a very nice design for a Marx using MMC's and they only cost $3 per
 > cap. If you make it to our Cheesehead Teslathon I can share the data with
 > you.
 >
 > We charge at 60 kV/stage using either a flyback tripler or an x-ray xmfr
 > (faster charging) and run 60 MMC caps on each stage. This gives up .01 MFD
 > total cap per stage at 60 kV and makes a very bright output spark at 600
kV
 > with 10 stages.
 >
 > Less expensive than doorknobs.
 >
 > Dr. Resonance
 >
 > Resonance Research Corporation
 > E11870 Shadylane Rd.
 > Baraboo WI 53913
 >
 >