Re: door knob caps

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "John by way of Terry Fritz <teslalist-at-qwest-dot-net>" <fireba8104-at-yahoo-dot-com>

Thanks Dr. Resonance,
I was considering using MMC(tons of radio shack 2kv caps) for caps to if I 
couldn't find doorknobs. Unfortunately I live in New Jersey(no jokes 
please) and Chessehold is to far away. Also I hope you win that 250 kv 
x-ray transformer. I say at least a 4 stage Marx.
Thanks,
John


Tesla list <tesla-at-pupman-dot-com> wrote:
Original poster: "Dr. Resonance by way of Terry Fritz "


I have a very nice design for a Marx using MMC's and they only cost $3 per
cap. If you make it to our Cheesehead Teslathon I can share the data with
you.

We charge at 60 kV/stage using either a flyback tripler or an x-ray xmfr
(faster charging) and run 60 MMC caps on each stage. This gives up .01 MFD
total cap per stage at 60 kV and makes a very bright output spark at 600 kV
with 10 stages.

Less expensive than doorknobs.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo WI 53913


Do you Yahoo!?
<http://us.rd.yahoo-dot-com/evt=10469/*http://sitebuilder.yahoo-dot-com>Yahoo! 
SiteBuilder - Free, easy-to-use web site design software