Re: 6Kv/30mA

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Mark W. Stolz by way of Terry Fritz <teslalist-at-qwest-dot-net>" <mark_w_stolz-at-hotmail-dot-com>

Jeremy,

I get similiar results from my table top coil fed by a 7.5/30 NST.
http://teslacoils4christ-dot-org/~mark.stolz/2inch/2inch.html

Mark Stolz
Houston, TX
http://teslacoils4christ-dot-org/

>Original poster: "Jeremy Scott by way of Terry Fritz 
><teslalist-at-qwest-dot-net>" <supertux1-at-yahoo-dot-com>
>
>So, just for fun I decided to hook up my 6Kv/30mA NST
>to my 4.5" coil. The coil was designed for 15Kv/60mA,
>so with a little adjusting of the SRSG it would fire
>for 6Kv. Capacitor size is 10nF. I got approximately
>12" streamers. Is this comparable to say, a smaller
>desktop coil that uses the same level of power?