[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

6Kv/30mA

To: tesla-at-pupman-dot-com
Subject: 6Kv/30mA
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Thu, 07 Aug 2003 09:37:25 -0600
Resent-Date: Thu, 7 Aug 2003 09:39:48 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <NiHHLD.A.zIF.3KnM_-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Jeremy Scott by way of Terry Fritz <teslalist-at-qwest-dot-net>" <supertux1-at-yahoo-dot-com>

So, just for fun I decided to hook up my 6Kv/30mA NST
to my 4.5" coil. The coil was designed for 15Kv/60mA,
so with a little adjusting of the SRSG it would fire
for 6Kv. Capacitor size is 10nF. I got approximately
12" streamers. Is this comparable to say, a smaller
desktop coil that uses the same level of power?

Prev by Date: Why does running an NST on an async gap kill it?
Next by Date: Re: Help
Prev by thread: Re: Why does running an NST on an async gap kill it?
Next by thread: Re: 6Kv/30mA
Index(es):
- Date
- Thread