Re: Kynar Wire Secondary

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Gregory Hunter by way of Terry Fritz <teslalist-at-qwest-dot-net>" <ghunter31014-at-yahoo-dot-com>

Some years ago I built a small secondary (4" x 22")
using 22AWG stranded, vinyl insulated hookup wire. I
still varnished it though, to lock the windings in
place. The secondary worked OK, though the resonant
frequency was a bit high due to the low turns count.

http://hot-streamer-dot-com/greg/junkbox1.htm
http://hot-streamer-dot-com/greg/junk.htm

Cheers,

--- Tesla list <tesla-at-pupman-dot-com> wrote:
 > Original poster: "Vivek Babtiwale by way of Terry
 > Fritz <teslalist-at-qwest-dot-net>" <dr_vek-at-yahoo-dot-com>
 >
 > Has anyone used Kynar wire or any other heavily
 > insulated wire for the secondary? Seems like varnish
 > would not be unnecessary if heavily insulated wire
 > was used.
 >
 > _
 >
 >


=====
Gregory R. Hunter

http://hot-streamer-dot-com/greg