Re: Magnifier conversion

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "colin.heath4 by way of Terry Fritz <teslalist-at-qwest-dot-net>" <colin.heath4-at-ntlworld-dot-com>

hi terry,
             what a beautiful looking coil! i cant wait to see the results as
this is a size magnifier i can fit in my garage
cheers
colin

----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, April 21, 2003 3:02 AM
Subject: Re: Magnifier conversion


 > Original poster: "Terry Fritz" <teslalist-at-qwest-dot-net>
 >
 > Hi All,
 >
 > Lots going on this weekend but I did manage to build the primary coil.
 >
 > http://hot-streamer-dot-com/temp/NewMag/0420-01.jpg
 >
 > It's 16 inches in diameter and 11+ turns.  Just 1/2 inch Lexan with a
bunch
 > of serious cutting ;-)  So I have the primary and secondary all done now.
 >
 > http://hot-streamer-dot-com/temp/NewMag/0420-02.jpg
 >
 > I left room for a ton of poly sheeting incase primary to secondary arcing
 > is a problem.
 >
 > Still have not done a thing on the C2 cap but I have all the stuff so just
 > a matter of building that and it will be pretty much done.  Maybe some
 > corona rings here and there too...
 >
 > Cheers,
 >
 > Terry
 >
 >
 >