[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Secondary insulation; Racing sparks
Original poster: "John Richardson by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jprich-at-up-dot-net>
Hi,
After reading the latest thread concerning methods to insulate secondary
windings, I was wondering the feasibility of obtaining a piece of PVC with
an i.d. slightly larger than the o.d. of the secondary winding, slipping the
coil in and filling the gap with mineral or transformer oil, after proper
sealing measures have been taken. Seems to me that this would eliminate
insulating difficulties and protect the secondary from flashovers. Thoughts
would be appreciated.
John Richardson
(Terry, sorry for sending this to the wrong address.) > No problem ;-) <