[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

6 MOT Coil

To: tesla-at-pupman-dot-com
Subject: 6 MOT Coil
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sat, 31 Aug 2002 11:52:55 -0600
Resent-Date: Sat, 31 Aug 2002 11:58:27 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <IykWxC.A.l0C.iOQc9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "tesla by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-paradise-dot-net.nz>

Team

Can advise the idea of running 3MOT's off mains direct and 3 off Variac
works very well. Only running SRSG at 100bps at the moment.

After tuning under MOT control to get phase and tuning OK reconfigured mains
supply as above.

Started with 3 MOT's off mains then wound up variac to complete the job.
Shared mains current from Two breakers at the board by this method.

Rgds
Ted L

Prev by Date: Re: OLTC update - Poor seconadry Q
Next by Date: Re: arc length/secondary length and magnifier questions
Prev by thread: New 4" system: Plastic Capacitors Caps
Next by thread: unknown prob
Index(es):
- Date
- Thread