Re: transformer test for clone

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "BunnyKiller by way of Terry Fritz <twftesla-at-qwest-dot-net>" <bigfoo39-at-telocity-dot-com>

Tesla list wrote:

>Original poster: "D.Wightman by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<dwightman1-at-cox-dot-net>
>
>Dual 14,400 10kva pigs NEW!
>Secondarys wired 180 degrees out of phase with respect to each other, cases
>grounded to each other.
>Power output is 28,800 volts at 220 in, with the capability of over driving to
>300 or so, that would be 39,600volts! 
>
snipperz...

Hi Dave...

my piggie is wired as yours is but I placed both transformers into the 
same can...  had to use 75KV wire in the can along with extra card stock 
insulation ( which I removed from huge PFC caps) ... makes for a heavy 
piggie  ( hog?? ) tho...

Ive only pushed mine to 33KV...  things get a bit noisy after that  ... 
 I also use 4 1256D's for control. :)

Scot D