Re: how to's: SRSG

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Parpp807-at-aol-dot-com>

In a message dated 9/5/02 8:18:21 AM Central Daylight Time, tesla-at-pupman-dot-com 
writes:

> You'll need some sort of rotor hub.  Some people using arbor bits from
>  www.mcmaster-dot-com but you really do need a hub since these things tend to
>  slip.

Dan,
I use the McMC shaft arbors on a 10 inch disc of 3/8 G-10. I use the arbors 
all around the shop and there is no tendency for anything to spin off. Always 
rotate the shaft in the direction where the torque tightens the arbor.  

Happy day,
Ralph Zekelman