RE: JHCTES

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "John H. Couture by way of Terry Fritz <twftesla-at-qwest-dot-net>" <couturejh-at-mgte-dot-com>


pieter -

The JHCTES Ver 3.3 TC computer program is free and can be used on-line.
Click on -

   http://www.mgte-dot-com

Click on Tesla, then JHCTES Books, then go to bottom of the book page and
click on JHCTES Ver 3.3 program. When you click on "Calculate" at the bottom
of the computer input printout the outputs for the default coil will show.
The program instructions are shown on Couture's Tesla Coil Web Page.

The JHCTES Ver 3.1 is a similar program (but omits mutual inductance and K
Factor) and can be downloaded on to your computer. Use the JHCTES.zip
version.

John Couture

------------------------------------




-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Tuesday, September 03, 2002 6:39 AM
To: tesla-at-pupman-dot-com
Subject: JHCTES


Original poster: "The Cronje Family by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <cronkies-at-netactive.co.za>

list

where can i get the abovementioned program [JHCTES]?

pieter