[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Bleeder Resistor Calculation

To: tesla-at-pupman-dot-com
Subject: Re: Bleeder Resistor Calculation
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Fri, 18 Oct 2002 20:11:55 -0600
Resent-Date: Fri, 18 Oct 2002 20:11:03 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <q9debC.A.RlG.18Ls9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Parpp807-at-aol-dot-com>

In a message dated 10/18/02 5:09:24 PM Central Daylight Time, 
tesla-at-pupman-dot-com writes:

> My cap max voltage is 100KV

Jeremy,

...Not the voltage rating of the cap.
We need to know the APPLIED voltage.
For example, if you are using
a 15/ 30 NST, the applied voltage is 15 kV.

Happy day,
Ralph Zekelman

Prev by Date: RE: Testing your Coil, sans coils.
Next by Date: RE: Testing your Coil, sans coils.
Prev by thread: Re: Bleeder Resistor Calculation
Next by thread: Re: Bleeder Resistor Calculation
Index(es):
- Date
- Thread