Re: MOT supply construction question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jonathan Peakall by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jpeakall-at-madlabs.info>

Mike,

I should have mentioned, I crimp *and* solder. Good physical connection is
important.

Regards,

Jonathan Peakall

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, October 11, 2002 2:55 PM
Subject: MOT supply construction question


> Original poster: "Michael Strube by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <mjstrube-at-earthlink-dot-net>
>
>
> I m in the process of constructing a MOT-based supply that will be
immersed in
> oil. I ve not tried this before, so here is a naïve question do the
connections
> that will be under oil need to be soldered? Up to this point, all my dry
> transformers have just used the quick connects that are available on MOTs.
I m
> guessing that I need to solder those now if they will be in oil. Thanks in
> advance for any help.
>
> Mike
>
>
>
>