Re: circuit board makers

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Crow Leader by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>

I don't like the com-bloc selection of tools at home depot.

What should happen is protoype PCB places should charge $1 per extra cut.

KEN

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, November 26, 2002 10:13 PM
Subject: RE: circuit board makers


 > Original poster: "Mccauley, Daniel H by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>
 >
 >
 > Man, you are cheap.  Just buy a pair of metal shears at Home Depot for
about
 > $5.00.  These will cut PCB
 > boards almost perfectly.
 >
 > Dan
 >
 >
 >
 > It seems none of the "upload your artwork at incredible prices" prototype
 > places cut boards to size unless it's a "single pass" of some routing bit.
I
 > don't have or intend to buy a sander, magic jig, milling machine,
 > guillotine, sheet metal shears or anything to cut up boards. I don't know
 > anybody who has this stuff either.
 >
 > Maybe somebody on this list can take artwork and chop and drill some
boards
 > for me using some fantastic machinery they have. As long as there is no
 > trace of handmadeness, all is ok. Contact me off-list if you can do this.
 >
 > KEN
 >
 >
 >