Re: MMC construction

["Tesla list" <tesla-at-pupman-dot-com>]

Hi Matt,

You need to space the caps out.  The insulation on the outside is not 
enough to insulate them.

See:

http://hot-streamer-dot-com/TeslaCoils/MMCInfo/mmcinfo.htm

Tip #2

Cheers,

         Terry

At 11:01 PM 11/18/2002 -0500, you wrote:
>Well I finally got around to putting together my geekgroup cap mmc. Does 
>anyone think I would have problems with arcing between the caps with this 
>setup? I have put together two strings already and I want to make sure 
>this would be a safe design before doing the other five. The caps are 
>tight to each other.
>
>c194cb1.jpg
>Matt Whitman
>teslacoiler-at-hotmail-dot-com
>G-2 #1198
>KC2IEV