RE: Electrostatic Meters - AC not possible

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Mccauley, Daniel H by way of Terry Fritz <twftesla-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>


I must be doing something wrong then.

Dan




Hi Dan,

I have an Ernest Turner electrostatic voltmeter here which reads 20kVAC just
fine. I believe there are several types of electrostatic meters, maybe one
of the Bert's can enlighten us.

Safe Coiling,
Nick
_______________
Nick Field, HVFX
www.hvfx.co.uk

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, November 12, 2002 2:20 PM
Subject: Electrostatic Meters - AC not possible


  > Original poster: "Mccauley, Daniel H by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>
  >
  >
  >
  > To prove that AC measurements using a electrostatic meter is NOT
possible,
I
  > went into our lab today and tried measuring 4000VAC (60Hz) using both an
EIS
  > electrostatic meter and a Sensitive Research type electrostatic meter.
  >
  > For each test, the negative terminal of the electrostatic meter was
grounded
  > and connected to the return for the 4000VAC
  > source.  A true RMS multimeter with a high voltage probe was used to
verify
  > any readings.
  >
  > In each instance, the multimeter read the nominal 4000VAC rms, but the
each
  > electrostatic meter read ZERO volts.
  >
  > To verify the electrostatic meters were working i switched the source to
  > output 4000VDC and voila, the electrostatic meters both read 4000V on the
  > nuggin' !
  >
  > Dan
  >