[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Original poster: "rob by way of Terry Fritz <twftesla-at-qwest-dot-net>" <rob-at-pythonemproject-dot-com>
Tesla list wrote:
> Original poster: "rheidlebaugh by way of Terry Fritz
> Jimmy: not all potting can be removed with solvent. Those that can are
> usualy soften with Methylene chloride or methyl ethyl ketone.
> Robert H
> > From: "Tesla list" <tesla-at-pupman-dot-com>
> > Date: Fri, 24 May 2002 19:10:07 -0600
> > To: tesla-at-pupman-dot-com
> > Subject: depotting
> > Resent-From: tesla-at-pupman-dot-com
> > Resent-Date: Fri, 24 May 2002 19:26:34 -0600
> > Original poster: "jimmy hynes by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> > <chunkyboy86-at-yahoo-dot-com>
> > i have a flyback transformer from an old monitor but
> > i cant see the windings because it is potted. what
> > kinds of solvents are usually used?
> > =====
> > JImmy
Why do you need to see the windings? Am I missing something here. I
use a multimeter. Rob.
ps. generally the first thing I do with a flyback is to beef up the
insulation with Silcone RTV. The electrical or marine grade which
doesn't contain acetic acid.
The Numeric Python EM Project