Re: photos of MiniSync Rotary Gap

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Bert Hickman by way of Terry Fritz <twftesla-at-qwest-dot-net>" <bert.hickman-at-aquila-dot-net>

John,

I thought that little sync motor looked familiar... :^)

Nice little gap!!

Best regards,

-- Bert --
-- 
Bert Hickman
Stoneridge Engineering
Coins Shrunk Electromagnetically!
http://www.teslamania-dot-com

Tesla list wrote:
> 
> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<FutureT-at-aol-dot-com>
> 
> In a message dated 3/25/02 12:23:14 AM Eastern Standard Time,
tesla-at-pupman-dot-com
> writes:
> 
> >
> > John,
> >
> > That's a nice looking portable gap.  Where did you find that nice little
> > motor?
> >
> > Mark Stolz
> 
> Thanks, Mark,   I bought the motor at a Teslathon last year.
> 
> I just tried the rotary on my small TT-32 TC, but there seems to be
> too much jitter.  It works fine on the larger TT-42 coil, but the TT-32
> seems to be less tolerant of jitter.  I'm working on the issue.
> A 3600 rpm motor may be much better in this case.
> 
> J