Re: new MOT stack completed!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Gregory Hunter by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ghunter31014-at-yahoo-dot-com>

Yeah, good questions. I have a question too: any
chance we can see some pictures? Do you have a web
page? Perhaps you could post a couple of JPGs on
Terry's "hot-streamer"? I'm anxious to get a look at
this beast.

Greg
http://Hot-streamer-dot-com/greg

--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "tesla by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <tesla-at-paradise-dot-net.nz>
> 
> Interesting news, Same config here.
> Questions
> 1) Any PFC (I do 100uF or so)
> 2) Any ballasting and if so how much (I do 22mH)
> 3) Are outer xfrmrs in oil ? (mine are)
> Tnx
> Ted Linney in NZ
> ----- Original Message -----
> From: Tesla list <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Tuesday, March 26, 2002 7:24 AM
> Subject: new MOT stack completed!
> 
> 
> > Original poster: "Tim J by way of Terry Fritz
> <twftesla-at-qwest-dot-net>"
> <digital_raven45-at-hotmail-dot-com>
> >
> > I have successfully tested my 6 seriesed MOT Tesla
> Coil supply! I am
> > currently running 14.28 kV at 570 mA output power
> with slight to moderate
> > stress on the transformer insulation (floating 7.1
> kV on left, and right
> > outer MOT's with middle two MOT's grounded!)
> 
> 
> 
> 


__________________________________________________
Do You Yahoo!?
Yahoo! Movies - coverage of the 74th Academy Awards®
http://movies.yahoo-dot-com/