[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: AWG vs. Diameter

To: tesla-at-pupman-dot-com
Subject: Re: AWG vs. Diameter
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sat, 16 Mar 2002 21:22:55 -0700
Resent-Date: Sat, 16 Mar 2002 21:41:56 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <k1mF-.A.fcH.P6Bl8-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Goinbonkers-at-aol-dot-com>

Chris, 
  Since we are working with RF currents that are conducted on the surface, 1/4
inch tubing would work just as well as 1/4 inch diameter wire. 
Mike 


>
> Hi Folks! 
>
> Can anyone tell me the difference between 1/4" copper tubing and say, 6ga
> wire? 
> How do they compare in current carrying capability? Just curious 
>
> Chris W 
>

Prev by Date: RE: Mutual Inductance & K Factor (was : Arc Over Between Secondary and Primary Coils)
Next by Date: Re: AWG vs. Diameter
Prev by thread: AWG vs. Diameter
Next by thread: Re: AWG vs. Diameter
Index(es):
- Date
- Thread