[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: tube suitable for a coil?



Original poster: "Bert Hickman by way of Terry Fritz <twftesla-at-qwest-dot-net>" <bert.hickman-at-aquila-dot-net>

David,

No joy for this tube, David - it's a mercury vapor thyratron. Not a bad
size though - it's rated for a PIV of 10 kV and peak anode current of
77,000 amps, and an average current of 6.4 Amps. Filament is 5 Volts at
10 Amps.

-- Bert --
-- 
Bert Hickman
Stoneridge Engineering
Coins Shrunk Electromagnetically!
http://www.teslamania-dot-com

Tesla list wrote:
> 
> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<Tesla729-at-cs-dot-com>
> 
> Hey all,
> 
> I was just wondering if any of you tube coiler gurus could tell the
> suitability of this particular tube for a good sized tube coil.  <A
>
HREF="http://cgi.ebay-dot-com/ws/eBayISAPI.dll?ViewItem&item=1080020991&r=0&t=0&sh
> owTutorial=0&ed=1015784525&indexURL=0&rd=1">eBay item</A>
> <A
>
HREF="http://cgi.ebay-dot-com/ws/eBayISAPI.dll?ViewItem&item=1080020991&r=0&t=0&sh
> owTutorial=0&ed=1015784525&indexURL=0&rd=1"> 1080020991</A> Thank you in
> advance for your help.
> 
> David Rieben