Re: 6KD6 Vacuum tube Pinout

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Mddeming-at-aol-dot-com>

In a message dated 3/9/02 1:10:38 PM Eastern Standard Time, tesla-at-pupman-dot-com
writes:



>
> Its a 6KD6 tube and is used REAL well.
>
> I dont know much about tubes and dont know pinouts.Where can I go to find a 
> pinout for this tube?How much would it take to run a flyback transformer?
> I know I need 6.3volts but what current?
>
> Matt
>
>



Hi Matt,

6KD6 beam power horizontal Amplifier requires duodecar 12-pin socket.
Filament 2.85Amp -at- 6.3V warm-up time 11 sec.
Peak heater to cathode voltage 200V max.
Average heater to cathode voltage 200V max.
DC plate supply 990V
Peak pulse value (10usec 15% duty cycle) 7000V
Max bulb temp. 225C
peak cathode current 1400 mA
average  cathode current 400 mA
Max Positive DC voltage G3 20V
G2 voltage 200V
G2 input 5W
peak negative pulse G1 -250V

Pin connections:
1 & 12 Heater
2 Cathode
3 & 11 G2
4 & 10 G3
5 & 9 G1
6 & 8 N/C
7 IC
Cap Plate 

Matt D.