[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Toroid capacitance - was Re: Not just AOL???

To: tesla-at-pupman-dot-com
Subject: Toroid capacitance - was Re: Not just AOL???
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 05 Mar 2002 08:05:49 -0700
In-Reply-To: <000001c1c431$e8a16f20$6401a8c0-at-dq922ob>
References: <4.1.20020304170913.0153ee88-at-pop.dnvr.qwest-dot-net>
Resent-Date: Tue, 5 Mar 2002 08:12:07 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <0qwwiB.A.oi.7AOh8-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Jim,

The program at:

http://hot-streamer-dot-com/TeslaCoils/Programs/E-Tesla6.zip

Will find the secondary resonant frequency of a coil with various toroids.
See the readme and *.txt files included in the zip.

Cheers,

	Terry

At 05:38 AM 3/5/2002 -0500, you wrote:
>
>Hi all,
>How would one approximate the capacitance of a toroid. I just ran Tesla
>coil cad and it determined that I would need 16.36pF and that the
>secondary had 8.9pF by itself. Does this mean I need an additional
>7.46(totaling 16.36) OR 16.36 ON TOP OF than the 8.9? The toroid I built
>is a 3 inch ID dryer duct w/ aluminum tape job that uses two pie plates
>for a form. What would it rate at, and how do I determine this for
>myself? Thanks Jim L
>

References:
- AOL List Members
  - From: "Tesla list" <tesla-at-pupman-dot-com>

Prev by Date: Paging Mr. Pool... Mr. Bert Pool..
Next by Date: EMI Filter Freq
Prev by thread: AOL List Members
Next by thread: Re: AOL List Members
Index(es):
- Date
- Thread