[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

More on Thoriated Tungsten

To: tesla-at-pupman-dot-com
Subject: More on Thoriated Tungsten
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sat, 25 May 2002 20:54:25 -0600
Resent-Date: Sat, 25 May 2002 20:54:35 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <3xtzSD.A.L1H.o5E88-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Steve Mach by way of Terry Fritz <twftesla-at-qwest-dot-net>" <gossamer-at-cox-dot-net>

Greg,All,  Today I talked to the fabricators about grinding thoriated rods.
Their reply: you MUST,MUST either "wet grind" or wear well fitting mask
approved for radioactive particulates.They "wet grind"(both their rods and
mine). SM
(perhaps I should dig up my geiger counter and investigate,if it still works)

Prev by Date: Re: Variable Capacitance and Inductance
Next by Date: Re: depotting
Prev by thread: Back and forth
Next by thread: Re: More on Thoriated Tungsten
Index(es):
- Date
- Thread