[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: HV Cable Sources?



Original poster: "Jeff Kamla by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jeffk-at-sinclair-dot-net>

Howdy  Ted  All

 the best way to get a wire or any thing thing else throught a tube or
sleeve is to pull it through !
first blow a string through your tube then use it to pull the wire through.
get a string longer than your tube, to one end attach a mouse the mouse is
any device that will pull the string through the tube when you apply presure
( a few or many strands of wool, or a round styrofoam ball just smaller than
the tube ID ) put the mouse and some string in the end and use a air
compressor  or a vacuum cleaner exhaust to blow the string through the tube.
happy coiling !

 jeff......



----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, May 23, 2002 11:12 AM
Subject: RE: HV Cable Sources?


> Original poster: "Ted Rosenberg by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <Ted.Rosenberg-at-radioshack-dot-com>
>
> Robert: I believe in sleeving too. However, how do you sleeve a 4 or 5
foot
> length without becoming very frustrated? Teflon grease?
>
> Safety First
>
> Ted
>
> --------------
> Subject: Re: HV Cable Sources?
>