Re: Help with first VTTC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Mike Veldman by way of Terry Fritz <twftesla-at-qwest-dot-net>" <vmike-at-email.ceat.okstate.edu>

At 08:25 AM 6/28/02 -0600, you wrote:
>Original poster: "Steven Ward by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<srward16-at-hotmail-dot-com>
>
>
>Thank you a bunch for the help, can anyone explain why there are 4 
>connections to the tube, while there are 5 terminals(1 on top, 4 on bottom) 
>on the 811A tube,  Also where is a good wiring schematic for an 811A?
>
>Steve Ward


The two large pins on the bottom are the filiment connections, pin #3 is
the grid connection, the plate is the top connection.  
For a pinout of the 811A, if the link is still good try,
www.duncanamps.simplenet-dot-com/tubedata/search.mv?811A+gYHDU6CWD8s
mike