Re: HV resistors for MMC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Scott Hanson by way of Terry Fritz <twftesla-at-qwest-dot-net>" <huil888-at-surfside-dot-net>

Sean -

Better go back and re-check the Digikey price list. The actual pricing is
$4.80 EACH, not $4.80 per 50 pieces.

The price drops to $2.33 each in quantities of 50, still an order of
magnitude too pricey for MMC use.

If you find these anywhere for 9 cents each, please let me know!

"If something seems too good to be true ......"

BR,
Scott Hanson
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, June 26, 2002 7:28 AM
Subject: HV resistors for MMC


> Original poster: "Sean Taylor by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<taylorss-at-rose-hulman.edu>
>
> I don't know if anyone has brought up these resistors before, but I was
> looking around on digikey, and found these: MOX400J-10M-ND,
> http://www.ohmite-dot-com/catalog/pdf/v_minimox.pdf, they are the mox-400-23,
> the epoxy coated ones.  Currently only $4.80 for 50 of them, not too bad.
> Anyone use these before? Don't know why they wouldn't work, they're rated
at
> 3/4 W, and 2500 V!
>
> Sean Taylor
>
>
>
> ---
> [This E-mail scanned for viruses by SURFSIDE INTERNET]
>
>