Re: Transformers impregnant

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Crow Leader by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>

you will need a vacuum chamber and furnace to use any typical transformer
impregnant. They tend to be based off foul solvents as well, and never
really dry at room temperature. I got some once and it was too nasty to work
with I just used some varnish for wood instead.

KEN

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, July 28, 2002 1:27 PM
Subject: Transformers impregnant


> Original poster: "Rick W by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<potluck-at-xmission-dot-com>
>
> Hi List,
>
> Anyone know where to get transformer impregnants? Preferably heat cured
but
> right now I'll take just about anything that will work. And I've checked
what
> little there is in the way of motor rewinding shops etc. around town. All
say
> they can't, or won't sell to the public. Not in so many words but the
results
> are still the same.
>
> Thanks
>
> Rick W.
>
>
>
>