Re: Motor shaft hubs for Syncrhonous Rotor: Arbors

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tb3-at-att-dot-net>

Excellent tip Chris.  I need these.

Specifically, look for "motor arbors". Page 2450

http://www.mcmaster-dot-com/


Here is the link to the exact frame.

http://www.mcmaster-dot-com/catalog/108/html/2450.html

Connect arbors to motors for grinding, buffing, wire-
wheel brushing, and similar jobs. The female end slips 
over the motor shaft and is held in place by a socket 
set screw(s). Shaft thread is right hand. Flanges and 
hex nut are included.  

Female  Male    Max.   Flange  O'all    
End     End     Width  Dia.    Length            Each   
 
1/4"  3/8"-24  1/2"   1 1/4"  2"      43555A21  $3.63  
 
5/16" 3/8"-24  1/2"   1 1/4"  2"      43555A22  3.63  
 
3/8"  3/8"-24  1/2"   1 1/4"  2"      43555A23  3.63  
 
1/2"  1/2"-20  1 1/4" 1 5/8"  3 1/2"  43555A24  4.50  
 
5/8"  1/2"-20  1 1/4" 1 5/8"  3 1/2"  43555A25  4.50  
 
 
Terry Blake











> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <CTCDW-at-aol-dot-com>
> 
> Look in Mcmaster under Arbors....thats what I used.
> 
> Chris W
> 
>