[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Simple RF Ground . . . so in otherwords . . .



Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>

The former will work better.  You really want low impedances and nice field
control in the direct vicinity of the coil.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, July 15, 2002 10:00 PM
Subject: Re: Simple RF Ground . . . so in otherwords . . .


> Original poster: "Daniel McCauley by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>
>
> So in otherwords, for my coil i can either just use a large chicken wire
> sheet underneath my coil connected to  the secondary rf ground or just use
a
> copper pipe buried in my backyard and connect rf ground to that.
>
> Dan
>
>
>
>