Re: First Pics of my First Tesla Coil

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "teri mckenney by way of Terry Fritz <twftesla-at-qwest-dot-net>" <mck-at-ezy-dot-net>

Dan,
Look'in good! What's the specs on you're secondary?I'm running a 15/60 with
a .0168uf cap, static gap,secondary is 4"pvc with 28awg wire wound27" (about
1600 turns) with a 6"x24" toroid and I'm tapped on the primary at 16 turns.
Billy
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, July 13, 2002 11:42 PM
Subject: First Pics of my First Tesla Coil


> Original poster: "Daniel McCauley by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>
>
> Just wanted to thank everyone for their help so far.  My very first
> conventional tesla coil is on its way.  You can see some of the
> pictures of this coil in progress at:
>
> http://www.spacecatlighting-dot-com/teslacoil3.htm
>
> Thanks again!
>
> Dan
>
>
>
>
>