Re: Digital O-scopes for TC use

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>

Would that be the cards from Gage Applied Sciences (now a division of
Tek?)...  I've used these cards since the late 80's.  They work great.. very
good attention to analog design, etc. which isn't always the case for things
designed to slot into a PC.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, July 13, 2002 8:04 PM
Subject: Re: Digital O-scopes for TC use


> Original poster: "Daniel McCauley by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>
>
> If you really want to get a nice digital scope, check out Tektronix new
> computer based digital scopes.  They are much cheaper than their high end
> digital scopes plus you get a full computer system as well.  We just
> purchased 10 high end ones of this variety for $18k apiece for our latest
> transmitter test room, but the lower end models start around $5k i think.
> Much cheaper than the Tek 764 or similar digital scopes.
>
> And best of all, you can search the internet and play network quake on
your
> oscilloscope!!!!
>
> dan
>
>
>
>