[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Best Material for Primary Coil Supports



Original poster: "Malcolm Watts by way of Terry Fritz <twftesla-at-qwest-dot-net>" <m.j.watts-at-massey.ac.nz>

Hi Dan,

On 9 Jul 2002, at 7:26, Tesla list wrote:

> Original poster: "Mccauley, Daniel H by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>
> 
> 
> I'm looking for a material to use for my pancake primary coil supports.   In
> your experience what works best, in that its easy to machine and work with,
> and has good dielectric properties:
> 
> So far I was looking at:
> 
> PVC
> High Dense Polyethylene
> 
> Thanks
> Dan

Acrylic/PMMA/perspex/lucite has worked well for me.

Regards,
malcolm