[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Location of Primary relative to Secondary???

To: tesla-at-pupman-dot-com
Subject: Location of Primary relative to Secondary???
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sun, 07 Jul 2002 17:18:47 -0600
Resent-Date: Tue, 9 Jul 2002 06:53:46 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <srlI-C.A.xJD.8ytK9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Daniel McCauley by way of Terry Fritz <twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>

Regarding pancake primary coils?

Where should the secondary coil reside relative to the flat plane of the
pancake primary coil?  Should it be level with the base of the secondary
coil or is this something that has to be adjusted during operation.

Thanks again.

Dan

Prev by Date: Re: TI UC2710 vs. Microchip TC4422 FET drivers
Next by Date: Re: Sheppard-Talyor circuit up on my website/ low Z construction technique
Prev by thread: Cron <teslarchive-at-poodle> /home/teslarchive/movem.sh > /home/teslarchive/movem.log
Next by thread: Re: Location of Primary relative to Secondary???
Index(es):
- Date
- Thread