[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Sheppard Taylor Circuit and High Voltage Ceramic Capacitors

To: tesla-at-pupman-dot-com
Subject: Re: Sheppard Taylor Circuit and High Voltage Ceramic Capacitors
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 03 Jul 2002 21:01:40 -0600
Resent-Date: Wed, 3 Jul 2002 21:03:57 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <6RBPc.A.2I.Ms7I9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "rob by way of Terry Fritz <twftesla-at-qwest-dot-net>" <rob-at-pythonemproject-dot-com>

Tesla list wrote:
> 

> Why not use low ESR electrolytics?
> 
> Regards,
> Malcolm

They are huge at 450V, and they don't make small uF values. They call
them "computer grade".  But I doubt that any 450V cap can have the low
ESR that the SMPS output caps can achieve ( < 25V).  That is if I
understand correctly how caps are internally constructed.  Rob.

-- 
-----------------------------
The Numeric Python EM Project

www.pythonemproject-dot-com

Prev by Date: Re: Sheppard-Talyor circuit up on my website/ low Z construction technique
Next by Date: New Video
Prev by thread: Re: Sheppard Taylor Circuit and High Voltage Ceramic Capacitors
Next by thread: Re: Sheppard-Talyor circuit up on my website/ low Z construction technique
Index(es):
- Date
- Thread