Re: my PT needs no ballast!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Crow Leader by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, June 30, 2002 8:20 PM
Subject: my PT needs no ballast!


> Original poster: "Tim J by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<digital_raven45-at-hotmail-dot-com>
>
> I found an older General Electric 20:1
> (2400 VAC to 120 VAC) Instrumentation Potiential Transformer...I plugged
it
> into my 15A socket w/ ballast and barely got the transformer to turn over.
> Then I decided just for "fun" to plug it into my dryer socket using only
one
> side for a 120VAC 30A...with no ballsting..and presto! I got a KILLER 2400
> VAC -at- 1.5A output...UV was intense!

It does not sound like you really measured the output. If you can, I'm
curious as to what it really is.

KEN