Re: HV DC supply design

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Richard Williams by way of Terry Fritz <twftesla-at-qwest-dot-net>" <richardwwilliams-at-earthlink-dot-net>


----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, January 28, 2002 10:23 PM
Subject: HV DC supply design


> Original poster: "Richard Williams by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <richardwwilliams-at-earthlink-dot-net>
>
> Hi List,
>
> Building a HV DC supply still in design stage but I have most of the
parts.
> It's actually a combination of two supplies. One is powered by
Franceformer
> NSTs the other by a power transformer. The outputs I have connected in
> parallel. One side, the NST side could be used for trials since current is
> limited.
>
> This is still in design stage so necessary changes can/will be made.
>
> It'll weigh a ton but weight is not an issue. I have 2 cables, 4 conductor
#3
> gauge and 4 conductor #6 gauge, both 25 feet, along with assorted
electrical
> service boxes, breakers etc for power input. Also have assorted lengths of
> lighter #8 and #10 power cables.
>
> I'm looking for suggestions, opinions, changes. I'd like to only do this
once
> and I value this list's knowledge base very highly.
>
> The design can be viewed at:
>
>
<http://home.earthlink-dot-net/~sirpotluckutk/HVSupply04.jpg>http://home.earthl
> ink-dot-net/~sirpotluckutk/HVSupply04.jpg
>
> ATTENTION:
> This is a 384K jpg graphics file.
>
> Thanks all !!!
>
> Rick W.
> Salt Lake City


Don't know how I goofed the link but here it is again....

http://home.earthlink-dot-net/~sirpotluckutk/HVSupply04.jpg