[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Un-Needed Primary Supports



Original poster: "sundog by way of Terry Fritz <twftesla-at-qwest-dot-net>" <sundog-at-timeship-dot-net>

Hi All!

    Lucky winner is Bob!  I was surprised at the turnout of emails on these,
but then again, I can remember how much of a pain in the butt it was for me
to make my first few sets.

Thanks all!
------------------------------------
Shad (Sundog)
G-1 #1203
"To call someone crazy just shows
you can't understand their views on Life."
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, January 25, 2002 2:09 PM
Subject: Un-Needed Primary Supports


> Original poster: "sundog by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<sundog-at-timeship-dot-net>
>
> Hi All!
>     I have a set of primary supports that I don't need. They're 1/4" thick
> lexan, slotted for 1/4" copper tubing, 1/2" turn-to-turn (1/4" between the
> turns).  Each turn has a hole underneath it for a ziptie.  Originally they
> were drilled and tapped for 10x32 nylon bolts, but I now just use Plumbers
> Goop to secure my primary supports. At the moment, the supports are
slotted
> for ~20 turns, but I'm going to cut them down to 10-12 turns because some
> are bent.  There are some scratches and nicks in the plastic, and some of
> the edges are chipped where I was was cutting the slots on the tablesaw.
> There's 6 supports (not optimal but it works).  I have no need for them,
but
> I hate to see good parts go into the bin or sit on the shelf because I
don't
> need 'em.  It'll save someone some time anyway, and get 'em off my shelf
:)
>
> First email into sundog-at-timeship-dot-net get's 'em.  I'll cover shipping
(it'll
> only be a few bucks), UPS ground.
>
> same construction technique as used on these
> http://sundog.timeship-dot-net/HV/3_inch_coil/primary_supports.jpg
> I haven't had any arcing turn to turn or carbon tracking along the
supports.
>
> Any takers?
> ------------------------------------
> Shad (Sundog)
> G-1 #1203
> "To call someone crazy just shows
> you can't understand their views on Life."
>
>
>
>