Re: Wire isolation.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Kamil,

I usually try not to go over 500V between turns.  I think that is very low
but I am assuming coils get scratch and banged around.  My big coil has the
insulation scratched off every inch for a test I did and it still does fine
with the bare spots.

Cheers,

	Terry

At 12:58 PM 1/24/2002 +0100, you wrote:
>Hi!
>
>Could You tell me how many volts can stand isolation of
>enamelled wire (wire is 0.2mm diameter)?
>
>Kamil Kompa
>
>
>----------------------------------------------------------------------
>Codzienny, bezplatny Biuletyn Ekonomiczny. Informacje gospodarcze. 
>Gielda. Kursy. Stopy. Waluty... http://biznes.interia.pl/biuletyn/
>