Re: 14" arcs, staccato effects, SSTC first light

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Fucian-at-aol-dot-com>

In a message dated 1/9/02 9:51:48 AM Eastern Standard Time, tesla-at-pupman-dot-com 
writes:

<< Hi Matt and All.
 
 > Is it possible to get any schematics?
 >
 >Matt
 
 Yes. I will have schematics on the website before the end of next
 week. Schematics, PCB layouts, parts lists, construction notes. Now
 that's a LOT to do while working and going to college classes and
 making SSTC's....but I can at least get the schematics up. It's a
 simple circuit, and all parts are from Radio Shack except the gate
 drive isolation transformer cores. I am placing an order with Amidon
 corporation, I think I know a core that will do the job. I will test
 it, then point people to that part number so we'll all know that it
 is is 100% tested true. Of course I'll mention that on the schematic.
 
 I'd like to mention one more time, that both Aron and I built our
 H-bridges DIRECTLY OFF OF Richie Burnett's website at:
 
 www.richieburnett.co.uk
 
 A wonderful design. We've proven it highly reliable provided that the
 circuit board is layed out correctly. You've GOT to keep in mind that
 this circuit switches hundreds of amps in only nanoseconds.
 
 Take care, and please feel free to email us any questions you may
 have regarding our SSTC's.
 
 Justin Hays (webmaster)
 KC5PNP
 Email: justin-at-hvguy-dot-com
 Website: www.hvguy-dot-com
  >>
Ok well i really only need to know the parts you used for the staccato part 
of the 556.

Matt