[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

gap material



Original poster: "Jeff Kamla by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jeffk-at-sinclair-dot-net>

Howdy

 if you are speculating what might happen that is fine, if you are
interested in some good  "spark gap material"  I can supply that.
I have Thoariated Tungsten rod in  in various diameters and lengths
this is the best material for gap use it's been proven over and over
again and is the only gap material used by the big coils.

if your interested drop me a line.    have a good day !


         jeff......

-- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, January 05, 2002 6:59 PM
Subject: americium 241


> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<RQBauzon-at-aol-dot-com>
>
> i was wondering if by attaching a chunk of americium 241 to my spark gap,
i
> could aid the ionization process thus yielding a higher break rate? or
would
> that just be defeating the purpose of quenching?
>
>
>
>