[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: DC Secondary Output?



Original poster: "rheidlebaugh by way of Terry Fritz <twftesla-at-qwest-dot-net>" <rheidlebaugh-at-zialink-dot-com>

Yes: I have used point/cup carrona rectifiers with good sucess. They tend to
be quite noisy and you must deal with that problem. I use small tungsten
electrodes (1/16) sharpened and 1/2 toilet floats as anodes. If you blow
glass you can make better using florence chemical flasks and stainless steel
foil as a start.
  Robert  H

> From: "Tesla list" <tesla-at-pupman-dot-com>
> Date: Tue, 26 Feb 2002 07:51:55 -0700
> To: tesla-at-pupman-dot-com
> Subject: DC Secondary Output?
> Resent-From: tesla-at-pupman-dot-com
> Resent-Date: Tue, 26 Feb 2002 08:00:45 -0700
> 
> Original poster: "Vivek Babtiwale by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <dr_vek-at-yahoo-dot-com>
> 
> Have any of you rectified the 500KV or greater of
> secondary output of a tesla coil?
> 
> 
>