primary tapped at 2 turns

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "colin.heath4 by way of Terry Fritz <twftesla-at-qwest-dot-net>" <colin.heath4-at-ntlworld-dot-com>

hi all
        i have my primary tapped at two turns now instead if 8 turns before 
i was running a 7.5kv 60ma supply and i am now running 5kv 120ma 
is it normal for the tap to go inwards rather than out because when i changed
from 6kv 30ma to 7.5kv 60ma it went further out but now its two turns on 120ma
5kv
any ideas will be much appreciated
many thanks
colin heath